*Backed out changeset 3be01fb200a5

--HG--
branch : trunk

dep/ACE_wrappers/ace/config-irix6.x-common.h

@@ -9,20 +9,27 @@
 // get reliable operation with multi-threading and exceptions.
 // Specifically you should get a reasonable current IRIX, Compiler
 // and POSIX patch-sets.
+
 // For IRIX 6.[34] it's less critical, but it's still recommended
 // that you apply the applicable patch-sets (IRIX and Compiler I believe).
+
 // These patches are updated frequently, so you should ask your support
 // contact or search SGI's web site (http://www.sgi.com) for the latest
 // version.
+
 // Use this file for IRIX 6.[234] if you have the pthreads patches
 // installed.
+
 #ifndef ACE_CONFIG_IRIX6X_COMMON_H
+
 #ifndef IRIX6
 # define IRIX6
 #endif
+
 #if ! defined(ACE_CONFIG_H)
 #error "This file may only be included by config-irix6.x-sgic++.h, config-irix6.x-kcc.h or config-irix6.x-g++.h"
 #endif
+
 // The Irix 6.x float.h doesn't allow us to distinguish between a
 // double and a long double.  So, we have to hard-code this.  Thanks
 // to Bob Laferriere <[email protected]> for figuring it out.
@@ -42,93 +49,130 @@
 #else
 # define ACE_SIZEOF_LONG_DOUBLE 8   /* 5.3 System */
 #endif
+
 // petern, Next part of it:
+
 // Platform supports getpagesize() call.
 #define ACE_HAS_GETPAGESIZE
+
 // Platform has no implementation of pthread_condattr_setpshared(),
 // even though it supports pthreads! (like Irix 6.2)
 #define ACE_LACKS_CONDATTR_PSHARED
 #define ACE_LACKS_MUTEXATTR_PSHARED
+
 #define ACE_LACKS_SUSECONDS_T
+
 // Platform/compiler has the sigwait(2) prototype
 #define ACE_HAS_SIGWAIT
 #define ACE_HAS_SIGTIMEDWAIT
 #define ACE_HAS_SIGSUSPEND
+
 // Platform supports System V IPC (most versions of UNIX, but not Win32)
 #define ACE_HAS_SYSV_IPC
+
 // Platform requires void * for mmap().
 #define ACE_HAS_VOIDPTR_MMAP
+
 // Platform supports recvmsg and sendmsg.
 #define ACE_HAS_MSG
+
 // Compiler/platform contains the <sys/syscall.h> file.
 #define ACE_HAS_SYS_SYSCALL_H
+
 // Compiler/platform supports alloca()
 // Although ACE does have alloca() on this compiler/platform combination, it is
 // disabled by default since it can be dangerous.  Uncomment the following line
 // if you ACE to use it.
 //#define ACE_HAS_ALLOCA
+
 // Compiler/platform has <alloca.h>
 #define ACE_HAS_ALLOCA_H
+
 // Irix needs to define bzero() in this odd file <bstring.h>
 #define ACE_HAS_BSTRING
+
 // Compiler/platform has the getrusage() system call.
 #define ACE_HAS_GETRUSAGE
+
 // Platform supports POSIX O_NONBLOCK semantics.
 #define ACE_HAS_POSIX_NONBLOCK
+
 // Compiler/platform has correctly prototyped header files.
 #define ACE_HAS_CPLUSPLUS_HEADERS
+
 // Platform contains <poll.h>.
 #define ACE_HAS_POLL
+
 // Platform supports the /proc file system.
 #define ACE_HAS_PROC_FS
+
 // Compiler/platform defines the sig_atomic_t typedef.
 #define ACE_HAS_SIG_ATOMIC_T
+
 // Platform supports SVR4 extended signals.
 #define ACE_HAS_SIGINFO_T
 #define ACE_HAS_UCONTEXT_T
+
 // Compiler supports the ssize_t typedef.
 #define ACE_HAS_SSIZE_T
+
 // Platform supports STREAMS.
 #define ACE_HAS_STREAMS
+
 // Compiler/platform supports strerror ().
 #define ACE_HAS_STRERROR
+
 // Compiler/platform supports struct strbuf.
 #define ACE_HAS_STRBUF_T
+
 // Compiler/platform supports SVR4 dynamic linking semantics.
 #define ACE_HAS_SVR4_DYNAMIC_LINKING
+
 // Platform provides <sys/filio.h> header.
 #define ACE_HAS_SYS_FILIO_H
+
 // Compiler/platform defines a union semun for SysV shared memory.
 #define ACE_HAS_SEMUN
+
 // Platform supports IP multicast
 #define ACE_HAS_IP_MULTICAST
 #ifdef ACE_LACKS_PERFECT_MULTICAST_FILTERING
   #undef ACE_LACKS_PERFECT_MULTICAST_FILTERING
 #endif
 #define ACE_LACKS_PERFECT_MULTICAST_FILTERING 1
+
 //**************************************************************
 // Not so sure how next lines should look like
+
 // Platform supports POSIX timers via timestruc_t.
 #define ACE_HAS_POSIX_TIME
+
 //**************************************************************
+
 // IRIX 6.4 and below do not support reentrant netdb functions
 // (getprotobyname_r, getprotobynumber_r, gethostbyaddr_r,
 // gethostbyname_r, getservbyname_r).
 #if (ACE_IRIX_VERS <= 64) && !defined (ACE_HAS_NETDB_REENTRANT_FUNCTIONS)
 #define ACE_LACKS_NETDB_REENTRANT_FUNCTIONS
 #endif /* ACE_HAS_NETDB_REENTRANT_FUNCTIONS */
+
 #define ACE_HAS_DIRENT
 // Unless the thread enabled version is used the readdir_r interface
 // does not get defined in IRIX 6.2
 #define ACE_LACKS_READDIR_R
 #define ACE_LACKS_RWLOCK_T
+
 #define ACE_HAS_GPERF
+
 #define ACE_HAS_NONCONST_SELECT_TIMEVAL
 #define ACE_HAS_BROKEN_DGRAM_SENDV
+
 #define ACE_LACKS_PLACEMENT_OPERATOR_DELETE
 #define ACE_PI_CONTROL_BLOCK_ALIGN_LONGS 2
+
 // Platform has POSIX terminal interface.
 #define ACE_HAS_TERMIOS
+
 // IRIX 6.5 supports AIO
 #define ACE_HAS_AIO_CALLS
 #define ACE_POSIX_AIOCB_PROACTOR
@@ -139,53 +183,76 @@
 #define ACE_HAS_SYSENT_H
 #define ACE_HAS_SYSINFO
 #define ACE_HAS_SYS_SYSTEMINFO_H
+
 // Platform has support for multi-byte character support compliant
 // with the XPG4 Worldwide Portability Interface wide-character
 // classification.
 #define ACE_HAS_XPG4_MULTIBYTE_CHAR
+
 // We need to setup a very high address or Naming_Test won't run.
 #define ACE_DEFAULT_BASE_ADDR ((char *) (1024U * 1024 * 1024))
+
 #define ACE_LACKS_SIGNED_CHAR
+
 // Platform supports reentrant functions (i.e., all the POSIX *_r
 // functions).
 #define ACE_HAS_REENTRANT_FUNCTIONS
+
 // Optimize ACE_Handle_Set for select().
 #define ACE_HAS_HANDLE_SET_OPTIMIZED_FOR_SELECT
+
 // Platform does not support reentrant password file accessor functiions.
 #define ACE_LACKS_PWD_REENTRANT_FUNCTIONS
+
 // uses ctime_r & asctime_r with only two parameters vs. three
 #define ACE_HAS_2_PARAM_ASCTIME_R_AND_CTIME_R
+
 // Prototypes for both signal() and struct sigaction are consistent.
 #define ACE_HAS_CONSISTENT_SIGNAL_PROTOTYPES
+
 #define ACE_HAS_UALARM
+
 // Scheduling functions are declared in <sched.h>
 #define ACE_NEEDS_SCHED_H
+
 // Compile using multi-thread libraries by default
 #if !defined (ACE_MT_SAFE)
   #define ACE_MT_SAFE 1
 #endif /* ACE_MT_SAFE */
+
 #if (ACE_MT_SAFE != 0)
+
 // Add threading support
+
 #define ACE_HAS_IRIX62_THREADS
+
 // Needed for the threading stuff?
 #include /**/ <task.h>
 #define PTHREAD_MIN_PRIORITY PX_PRIO_MIN
 #define PTHREAD_MAX_PRIORITY PX_PRIO_MAX
+
 // ACE supports threads.
 #define ACE_HAS_THREADS
+
 // Platform has no implementation of pthread_condattr_setpshared(),
 // even though it supports pthreads! (like Irix 6.2)
 #define ACE_LACKS_CONDATTR_PSHARED
 #define ACE_LACKS_MUTEXATTR_PSHARED
+
 // IRIX 6.2 supports a variant of POSIX Pthreads, supposedly POSIX 1c
 #define ACE_HAS_PTHREADS
+
 // Compiler/platform has thread-specific storage
 #define ACE_HAS_THREAD_SPECIFIC_STORAGE
+
 // The pthread_cond_timedwait call does not reset the timer.
 #define ACE_LACKS_COND_TIMEDWAIT_RESET 1
+
 // When threads are enabled READDIR_R is supported on IRIX.
 #undef ACE_LACKS_READDIR_R
+
 #endif /* (ACE_MT_SAFE == 0) */
 
+
 #endif /* ACE_CONFIG_IRIX6X_COMMON_H */